MyRecover
Top RAID 0 Data Recovery Methods: Easily Recover Data from RAID 0 Or 5
Learn the top RAID 0 data recovery methods to safely and efficiently recover lost or deleted files. This guide covers RAID 0 and RAID 5 recovery, recommended data recovery software, and step-by-step instructions for restoring important data. Whether your RAID array failed, got formatted, or suffered a system crash, these solutions make RAID 0 data recovery simple and reliable.
By Emma / Updated on September 23, 2025
How to Do a RAID 0 Data Recovery Safely?
I have a Raid 0 hard drive failure and I was able to recover the data, except it's recovered in a way where files are truncated and the original folder structure is completely nonexistent. In addition, the file names are gone and it's nearly impossible for me to piece together the giant jigsaw puzzle of partial files.
What is the best way to do a Raid 0 data recovery so that the original files aren't split up into many unnamed, partial files, without any folder structure whatsoever?
About RAID 0 Hard Drive
RAID 0 (Redundant Array of Independent Disks, Level 0) is a disk configuration that stripes data across two or more hard drives. This means data is split into blocks and written across all drives in the array simultaneously.
Purpose: Maximize speed and performance.
Drives Needed: Minimum 2 drives.
How Does It Work?
Data is divided into "stripes" and distributed across multiple disks.
Example: File A = Part 1 on Disk 1, Part 2 on Disk 2.
Since data is written/read simultaneously across drives, performance improves, especially for large files or applications like gaming, video editing, or database management.
👍Pros of RAID 0
- High speed: Read/write speeds are almost doubled with two drives, more with additional drives.
- Full storage utilization: All disk space is usable; no space is lost for parity (unlike RAID 1/5).
- Simple setup: Easy to configure in BIOS/UEFI or RAID software.
👎Cons of RAID 0
- No redundancy: If one drive fails, all data is lost.
- Higher risk: More drives = higher chance of failure.
- No fault tolerance: RAID 0 does not protect against drive failure.
How to Perform RAID 0 Data Recovery?
Recovering data from a RAID 0 array is far more challenging than typical hard drive recovery because RAID 0 provides no redundancy. If even a single drive fails, the entire array can become inaccessible. However, there are some professional RAID hard drive recovery software to help.
1. GetDataBack (RAID Recovery for Windows)
Designed for recovering NTFS-formatted Windows RAIDs, RAID Recovery for Windows supports both hardware and software RAID setups. It works with RAID 0 and RAID 5 configurations and can automatically detect RAID parameters, including start sector, block size, rotation, and drive order. The recovery process is fully automated through an easy-to-use wizard, requiring no manual input from the user.
Step 1: Download, install and launch RAID Recovery for Windows on your computer. A wizard will guide you through the recovery process.
Step 2: After a few minutes, an Explorer-like window will display all recoverable files and folders. You can now copy your data to another disk and preview many file types, such as pictures and documents before copying.
2. UFS Explorer RAID Recovery
UFS Explorer RAID Recovery is a professional yet user-friendly tool for handling data loss on almost any type of storage, including complex RAID systems. Suitable for both service centers and home users, it only takes a few simple steps to start recovery once the storage device is connected.
Step 1: Download, install and start the program on your computer. The software will automatically detect connected drives, images, or virtual disks.
Step 2:The program will usually build the RAID automatically by detecting parameters like block size and drive order. If automatic assembly fails, use the manual tools for complex systems such as Drobo BeyondRAID or LVM Thin Provisioning.
Step 3. Once the RAID volume is assembled, browse the files directly in the interface. If needed, run a quick or deep scan to locate lost or damaged data.
Step 4: Preview, search, or sort the recovered files, then copy them to a safe storage device that is not part of the original RAID.
3. Klennet Recovery
The Klennet Recovery supports RAID0, RAID1, and RAID5 arrays. The recovery process is straightforward and follows the usual pattern for RAID data recovery: download and install the software, review the list of disks and partitions, choose the one you need, and run a scan.
FAQs about RAID 0 Hard Drive
Q1. Does RAID 0 Have Backup?
No, RAID 0 does not provide any backup or redundancy. If one drive fails, all data in the array is lost, so you should always keep a separate backup on another device or cloud storage.
Q2. Is RAID the Same as a Backup?
No. RAID protects against some hardware failures, but it does not replace backups. Data can still be lost due to accidental deletion, corruption, malware, or multiple drive failures.
Q3. Will RAID 0 Delete My Data?
Setting up a new RAID 0 array will erase all existing data on the selected drives. Once created, RAID 0 itself doesn’t automatically delete files, but losing one drive will make all data inaccessible.
Q4. Can I Remove RAID 1 Without Losing Data?
Yes, usually you can remove a RAID 1 array without losing data, because the drives are mirrored. Each drive contains a complete copy, so you can often use a single drive independently.
Q5. Can You Change RAID Type Without Losing Data?
In most cases, no. Changing RAID types (for example, from RAID 0 to RAID 5) typically requires deleting and rebuilding the array, which erases all data. Some advanced hardware controllers or software solutions support RAID migration, but a full backup is always recommended first.
Summary
RAID 0 offers impressive speed and full storage utilization, but its lack of redundancy makes data loss more likely and recovery more complex. If you ever face a RAID failure or other hard drive recovery needs, it’s essential to use reliable tools that can maximize your chances of getting your data back safely.
Alongside specialized RAID recovery software, you may also need an all-in-one standalone hard drive recovery solution like MyRecover. It helps you restore lost files from HDDs, SSDs, external drives, and more with just a few clicks, making it a dependable choice for everyday data loss challenges.
MyRecover- High Recovery Success Rate: Achieves up to 99% recovery success.
- Unlimited Data Recovery:Recover unlimited data lost due to deletion, formatting, virus attacks, and more.
- AI-Powered Recognition and Recovery: Automatically identifies file types and uses deep scanning to ensure even the most difficult files can be restored.
- Wide Support for File Formats and Devices: Compatible with thousands of file types and hundreds of storage devices including HDDs, SSDs, USB drives, and SD cards.
- File Preview Before Recovery: Preview file content before recovery to verify integrity and avoid restoring unwanted or corrupted files.
100% Secure
100%
Clean & Secure
