The Diskpart delete volume force command in Windows 11/10 is a powerful tool for deleting partitions and volumes, but it should be used with caution. This article provides a comprehensive guide on how to use the command safely, including how to identify the correct volume and execute the process without errors. Whether you're managing disk space or accidentally deleted important data, this guide has you covered.
Managing partitions on your hard drive is an essential task for maintaining your system’s storage. Whether you are trying to clean up your disk, remove an old operating system partition, or reorganize your disk space, you might need to delete partitions. While there are several tools to help with partition management, Diskpart and Disk Management are powerful built-in utilities on Windows that allows you to manage disk partitions effectively and easily.
While using these two tools, you might notice that certain partitions can’t be deleted with them. When this happens, the Diskpart delete volume force command will be exactly what you need.
Deleting a partition can be a straightforward process, but it's essential to carefully consider the partition you wish to remove, and make sure all of the important data is backed up beforehand. In this section, we’ll guide you through the different methods to safely delete a data partition on Windows. Let’s dive into the steps for managing your partitions efficiently.
Disk Management is the easiest and most user-friendly method for deleting partitions on Windows. This method is ideal for most users because it provides a visual representation of your drives and partitions. Follow these steps to delete your partition:
Step 1. Press "Win" + "X" and choose "Disk Management" to open it.
Step 2. Navigate to the partition you want to delete and right click on it, then select "Delete Volume".
Step 3. A warning will appear informing you that deleting the volume will erase all data on it. If you're sure, click "Yes" to proceed.
If you prefer using the command line or need more advanced options, Diskpart is a great tool. It allows you to manage partitions directly, even when the Disk Management interface might be less responsive. This basic method works for most partition deletions but may require administrative privileges. Here's how to delete a partition using Diskpart:
Step 1. Locate Command Prompt in the Start menu and run it as administrator.
Step 2. In the opened Command Prompt window, enter the following command:
While you’re using these two methods, you might run into this: when you right-click the partition you want to delete in Disk Management, the "Delete Partition" option is gray (and you can’t click it). What’s more, using DiskPart to delete a partition may sometimes trigger an error saying "Cannot delete a protected partition without the force protected parameter set". In such cases, the DiskPart delete volume force command will fix the problem, even the volume is protected or hidden.
Before using the Diskpart delete volume force command, ensure you take the following precautions:
1. Back Up Your Data:
Always back up your important files with File History, Backup and Restore (Windows 7) or other backup tools before deleting any partition. This step is crucial to avoid permanent data loss.
2. Ensure the Correct Partition:
Use the list partition command in Diskpart to verify that you are selecting the correct partition. Accidentally deleting the wrong partition can result in loss of critical data.
3. Disconnect Unnecessary Drives:
If you have multiple external drives or partitions, disconnect them to avoid selecting the wrong one by mistake.
4. Close Applications and Programs
Make sure no applications or programs are using the partition you intend to delete.
Open Command Prompt in the Start menu and right click on it, then choose "Run as administrator". Enter the following command to force delete the partition that cannot be removed normally:
This command will forcefully remove the partition, even if it is write-protected or boot partition. Be cautious, as this operation is permanent.
If you’re trying to delete system partitions or boot partitions, such as the EFI system partition or Windows Recovery partition, start your PC from WinPE or Windows installation media first, then perform the partition deletion. As deleting these partitions can make your operating system unbootable. Always back up any important data before proceeding with partition deletion.
When this process finishes, enter "exit" and hit "Enter" to close the program.
Even with all this care, mistakes are inevitable. What if you accidentally delete the wrong partition, or need to get back critical files from a partition you’ve erased? Can it be done? Yes! MyRecover, a professional data recovery tool, allows you recover files from deleted partitions effortlessly. What’s more, it supports over 500 data loss scenarios, including data recovery from inaccessible partitions, formatted drives, corrupted SD cards, and even systems that won’t boot.
Let's explore the remarkable advantages of MyRecover:
✅Higher Success Rate – Advanced deep scan for NTFS/FAT32/exFAT drives.
✅500+ Devices Support – Recover files from all types of devices like SSD, HDD, USB flash drive, SD card, cameras, game console drives and more.
✅Supports over 1,000 file types – Including documents, photos, videos, audio, archives, and Outlook data files.
✅Smart scan modes – Choose from Quick Scan for recent deletions or Deep Scan for formatted/corrupted drives.
✅Real-time file preview – See recoverable files before restoring to ensure accuracy.
✅AI Empowered Recovery – AI-embedded file recognition and recovery algorithm makes easy use and 0 file omission.
✅OS Compatibility – Work not only on Windows 11 /10, but also on Windows 8.1/ 8/ 7 and all Servers.
Step 1. Download and install MyRecover on your computer from Microsoft Store.
Step 2. Deleted partitions are displayed as lost partitions in MyRecover. Run the program and select the lost partition to scan, then click "Scan" to start the scanning for lost files.
Step 3. After the scan completes, preview the files and choose the ones you want to recover under the "Path" or "Type" tab, then click "Recover" to restore them.
Step 4. Save the recovered files to a safe destination folder.
Once the process is done, the message "Files have been recovered successfully" will pop up. Then, you can view the recovered files by clicking on the "Browse" button.
If you accidentally erase the system or boot partitions and Windows won’t start at all, there’s no need to panic. MyRecover can still help you get your data back from the unbootable PC with a Windows recovery disk. Here's how:
Step 1. Download and install MyRecover on a working computer and prepare a blank USB drive.
Step 2. Connect the USB to your computer. Launch MyRecover and select "PC Crashed Recovery" section, click "USB Boot Device" and "Create".
Step 3. Wait for the bootable USB create successfully. Insert the USB into the unbootable PC and boot it with the USB.
Then your PC will automatically open the MyRecover interface, just follow the steps we covered earlier to get back the data you want.
Deleting a partition on Windows, whether you’re using Disk Management or DiskPart delete volume force command, is a relatively simple process, but it can have serious consequences if done incorrectly. Always ensure that you’ve backed up your data and double-check which partition you’re working with before proceeding.
If you find that you’ve made a mistake and need to recover lost files, MyRecover is a professional tool that can help you restore your lost data from the deleted partition quickly and efficiently. For all business and MSPs, MyRecover Technician edition can be the superior data recovery choice, which allows to activate MyRecover on unlimited Windows PCs and Servers with a single license.